جلد 5، شماره 1 - ( 3-1395 )                   جلد 5 شماره 1 صفحات 29-24 | برگشت به فهرست نسخه ها


XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Vafaee F, Firouz F, Khoshhal Khojasteh Zanjani M, Moshiri Z, Ranjzad H. A Comparison of Heat Generation in Different Depths of Implant Drilling Site with and without a Sleeve. Journal title 2016; 5 (1) :24-29
URL: http://3dj.gums.ac.ir/article-1-213-fa.html
A Comparison of Heat Generation in Different Depths of Implant Drilling Site with and without a Sleeve. عنوان نشریه. 1395; 5 (1) :24-29

URL: http://3dj.gums.ac.ir/article-1-213-fa.html


چکیده:   (3273 مشاهده)

Introduction:

The purpose of this study was to compare the
heat generated from different depths of an implant
drilling site with and without a sleeve.
Materials and methods:
In this study, 60 cortical bone samples were
used and a load of 2.0 kg was applied. rilling for
implant surgery, we used a diameter of 4.3 mm
and a normal sleeve. Heat was measured from 3
different depths(3,6, and 9 mms). Data was analyzed
with a three-way analysis of variance by
Newman–Keulsmultiple comparison procedure.
The significance level was set to a p-value of
0.05.
Results:
The mean maximum temperature with a sleeve
was 35.4°C and without a sleeve was 34.5°C.
Thermal rise was lowest in the sleeve group and
highest in the sleeveless group. There was a significant
difference between the sleeve and nonsleeve
group (P= 0.002). There was also no significant
differences between the different depths of
the three measurements (P= 0.068).
Conclusion:
Within the scope of this invitro study, thermal
rise during implant site preparation was lower
in conventional drilling compared to the use of
a sleeve. Hence, the difference was statistically
significant.

متن کامل [PDF 309 kb]   (1135 دریافت)    
نوع مطالعه: پژوهشي | موضوع مقاله: تخصصي
دریافت: 1395/3/28 | پذیرش: 1395/3/28 | انتشار: 1395/3/28

ارسال نظر درباره این مقاله : نام کاربری یا پست الکترونیک شما:
CAPTCHA

بازنشر اطلاعات
Creative Commons License این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است.

کلیه حقوق این وب سایت متعلق به مجله دانشکده دندانپزشکی دانشگاه علوم پزشکی گیلان می باشد.

طراحی و برنامه نویسی : یکتاوب افزار شرق

© 2024 CC BY-NC 4.0 | Journal of Dentomaxillofacial

Designed & Developed by : Yektaweb