[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 5, Issue 1 (6-2016) ::
3dj 2016, 5(1): 24-29 Back to browse issues page
A Comparison of Heat Generation in Different Depths of Implant Drilling Site with and without a Sleeve
Fariborz Vafaee , Farnaz Firouz , Masoumeh Khoshhal Khojasteh Zanjani , Zahra Moshiri , Hadi Ranjzad
Postgraduate Student of Prosthodontics Department of Prosthodontics, School of Dental Medicine, Hamadan University of Medical Sciences (UHSHA), Hamadan, Iran.
Abstract:   (462 Views)


The purpose of this study was to compare the
heat generated from different depths of an implant
drilling site with and without a sleeve.
Materials and methods:
In this study, 60 cortical bone samples were
used and a load of 2.0 kg was applied. rilling for
implant surgery, we used a diameter of 4.3 mm
and a normal sleeve. Heat was measured from 3
different depths(3,6, and 9 mms). Data was analyzed
with a three-way analysis of variance by
Newman–Keulsmultiple comparison procedure.
The significance level was set to a p-value of
The mean maximum temperature with a sleeve
was 35.4°C and without a sleeve was 34.5°C.
Thermal rise was lowest in the sleeve group and
highest in the sleeveless group. There was a significant
difference between the sleeve and nonsleeve
group (P= 0.002). There was also no significant
differences between the different depths of
the three measurements (P= 0.068).
Within the scope of this invitro study, thermal
rise during implant site preparation was lower
in conventional drilling compared to the use of
a sleeve. Hence, the difference was statistically

Keywords: Dental Implants, Dental Implantation, Temperature.
Full-Text [PDF 309 kb]   (235 Downloads)    
Type of Study: Original article | Subject: Radiology
Received: 2016/06/17 | Accepted: 2016/06/17 | Published: 2016/06/17
Add your comments about this article
Your username or Email:

Write the security code in the box >

DOI: 10.18869/acadpub.3dj.5.1.24

XML     Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Vafaee F, Firouz F, Khoshhal Khojasteh Zanjani M, Moshiri Z, Ranjzad H. A Comparison of Heat Generation in Different Depths of Implant Drilling Site with and without a Sleeve. 3dj. 2016; 5 (1) :24-29
URL: http://3dj.gums.ac.ir/article-1-213-en.html
Volume 5, Issue 1 (6-2016) Back to browse issues page
مجله دانشکده دندانپزشکی دانشگاه علوم پزشکی گیلان Journal of Dentomaxillofacial

Persian site map - English site map - Created in 0.14 seconds with 829 queries by yektaweb 3567